4) Configure the Router
- Mark the XBee ZigBee Router AT radio you configured with a “B.”
- Place the XBee into the XBee Explorer and click “Connect” in CoolTerm.
- Follow the same steps as before to program the second radio. Set the destination address to the coordinator radio’s address. See the chart below:
|PAN ID||ATID||2001 (any address from 0 to FFFE will do)|
|Destination address high||ATDH||0013A200|
|Destination address low||ATDL||[see your recorded Router Address]|
- Remember to type ATWR and press enter to save the settings.